Does your basement flood on a regular basis? Are you constantly throwing out belongings because they have been damaged by moisture? If so, you will need to get a sump pump in Oak Park. A sump pump in Oak Park is a clever contraption that directs water away from the area where water has accumulated. These appliances are very popular with homeowners and once installed, you can rely on them to keep your basement water-free on a daily basis. The installation process for a sump pump in Oak Park is relatively straightforward but should be done by a professional. To give you a better idea of how these devices work, you should learn a little more about the installation process.
The Types of Sump Pumps
Prior to contacting a plumber to install a sump pump in Oak Park, you need to select a suitable sump pump. There are two main types of sump pump that are installed in properties and these are submersible and pedestal pumps. While pedestal pumps are less costly than submersible pumps, they tend to last for just 15 years whereas submersible pumps can work with no problems for 20-30 years. Regardless of which appliance you choose, the sump pump will be complete with a lengthy cord. This cord stretches so that the sump pump can be plugged in and powered.
The Sump Pit
A sump pit needs to be dug before a sump pump in Oak Park can be installed. You should not attempt to dig a sump pit on your own unless you have experience in doing so. Jackhammers are normally used to penetrate the concrete floor and the sump pump should be used as a guide when digging the sump pit. The pit should be circular and at least four inches larger than the pump itself. Gravel should be used to fill any spaces in the sump pit, as this will hold the pump firmly in place. Concrete will then be applied to make the pit as strong as possible.
Installing a Sump Pump
The installation process can only take place once the concrete has dried and hardened. It is advisable to hire a plumber for this part of the process. Firstly, the plumber will connect the check valve to the sump pump in Oak Park, before fixing the PVC discharge piping to the appliance. Piping will then be run through a wall and extended to the exterior of the property. The purpose of this is to direct water away from the foundation, which ultimately prevents flooding. The area around the hole in the wall will then be sealed and the pump will be tested.
